'SA' Screw In, Fixed Rod Element Heater Single phase immersion heaters ranging from 1kW to 6kW in 1" to 1½" BSP. Suitable for domestic, building services and commercial applications. 'RX' Screw In, Fixed Rod Element Heater Single and three phase immersion heaters ranging from 1kW to 12 kW in 2" and 2¼" BSP. Suitable for domestic, light industrial, building services and commercial applications. 'WR' Screw In, Fixed Rod Element Heater Single and three phase immersion heaters ranging from 1kW to 24kW in 1" to 2½" BSP. Suitable for calorifiers, water cylinders, industrial and outdoor applications. 'WF' Flanged, Fixed Rod Element Heater Single and three phase immersion heaters ranging from 1kW to 24kW and fitted with fixed elements. Suitable for calorifiers, water cylinders, industrial and outdoor applications. 'CR' Screw In, Removable Core Element Heater Single and three phase immersion heaters ranging from 1kW to 6kW in 2½" BSP as a standard range. Higher kW loadings can be supplied. Suitable for water heating and anti-frost applications. 'RF' Flanged, Removable Core Element Heater Single and three phase immersion heaters ranging from 1kW to 6kW as a standard range. Higher kW loadings can be supplied. Suitable for water heating and anti-frost applications. 'FE' Flanged, Fixed Rod Element Heater Three phase immersion heaters ranging from 6kW to 60kW and fitted with fixed elements. Suitable for calorifiers, large water cylinders and flow heaters. 'GE' Glanded (Replaceable), Rod Element Heater Three phase immersion heaters ranging from 12kW to 1000kW and fitted with glanded elements which can be replaced. Suitable for calorifiers, large water cylinders, flow heaters, industrial and outdoor applications. Can be sepcified to heat caustics and various chemical solutions. 'RE' Flanged, Removable Core Element Heater Three phase immersion heaters ranging from 6kW to 250kW. Suitable for calorifiers, large water cylinders, flow heaters, heating oils, caustics and various chemical solutions, industrial and outdoor applications. 'MS' Calorifiers/Water Cylinders Suitable for building services and industrial water heating applications with capacities ranging from 250 litres to 3000 litres. Can be fitted with RX, WR, FE, GE, RE range immersion heaters and can be supplied pre-wired to a control panel. |